<text> Number of contours must be between 2 and 99. </text>
<help_topic> </help_topic>
</message>
<message>
<short_name> BadRgridNo </short_name>
<text> Number of radial grids must be between 2 and 99. </text>
<help_topic> </help_topic>
</message>
<message>
<short_name> BadAgridNo </short_name>
<text> Number of angular grids must be between 2 and 99. </text>
<help_topic> </help_topic>
</message>
<message>
<short_name> MCDSynErr </short_name>
<text> Invalid worksheet file </text>
<help_topic> </help_topic>
</message>
<message>
<short_name> CantOpenFile </short_name>
<text> Unable to open %s </text>
<help_topic> </help_topic>
</message>
<message>
<short_name> FileMany </short_name>
<text> Too many files have been opened.\nChoose Associate Filename to\ndissociate some files. </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> IllOverlap </short_name>
<text> Cannot Occupy Page Width since it would overlap existing region(s) </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> IllOverlapMulti </short_name>
<text> Cannot Occupy Page Width for one or more select regions, because it would cause overlap with existing region(s) </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NotText </short_name>
<text> Cursor must be in text. </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NotTextRegion </short_name>
<text> Cursor is not in text region </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NotFound </short_name>
<text> Not found </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NameTooLong </short_name>
<text> Name too long </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EmptySpace </short_name>
<text> Can't edit blank space </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TooLittleMemory </short_name>
<text> Not enough memory </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> UnknownVariable </short_name>
<text> Unknown variable %s </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> UnexpectedEOFinPRNfile </short_name>
<text> Unexpected EOF in PRN file, probably there is an undefined matrix in the PRN file </text>
<tip> Unexpected EOF in PRN file </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> VarOrigin </short_name>
<text> ORIGIN </text>
<tip> Too many files </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> LongList </short_name>
<text> This list contains too many items. </text>
<tip> Input list too long. </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> IllegalFunctionValue </short_name>
<text> Illegal function value. </text>
<tip> must be greater than zero </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MustBePositive </short_name>
<text> Can't evaluate this function when\nits argument less than or equal to zero. </text>
<tip> must be greater than zero </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoRange </short_name>
<text> Can't use a range variable\nin a solve block. </text>
<tip> range not allowed </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> InsufMem </short_name>
<text> Not enough memory for this operation. </text>
<tip> not enough memory </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> BigMatrix </short_name>
<text> matrix too large </text>
<tip> not enough memory </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MustBePositivePlot </short_name>
<text> Can plot only positive values\nwhen log axes are used. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> OpenBookDlg </short_name>
<text> Open Book </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> VarCloseDlgButton </short_name>
<text> Close </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PressF1ForHelp </short_name>
<text> Press F1 for help. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TooCloseToARegion </short_name>
<text> Too close to a region </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoCreateRegion </short_name>
<text> Can't create region. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Cantdelete </short_name>
<text> Can't delete operator between variables with different font. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DeleteOp </short_name>
<text> To delete operator, click on it first. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MarkerOutOfPlotBounds </short_name>
<text> At least one marker is outside the plot boundary </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ZoomDlg </short_name>
<text> Accepting Zoom or Full View removes any axis limits you have entered </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ZoomLog </short_name>
<text> Cannot Zoom plots with log scaling, or when a Trace Dialog is up </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoBitmapsInDoc </short_name>
<text> No palleted regions were found in the worksheet. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> BadXgridNo </short_name>
<text> No. of x-axis grids must be between 2 and 99. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> BadYgridNo </short_name>
<text> No. of y-axis grids must be between 2 and 99. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> BadZgridNo </short_name>
<text> No. of z-axis grids must be between 2 and 99. </text>
<tip> must be positive </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoPointsToPlot </short_name>
<text> All evaluations resulted in either\nan error or a complex result. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> XYCrosshairDlg </short_name>
<text> X-Y Trace </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> XCrosshairLabel </short_name>
<text> X-Value </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> YCrosshairLabel </short_name>
<text> Y-Value </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> XCrosshairButton </short_name>
<text> Copy &X </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> YCrosshairButton </short_name>
<text> Copy &Y </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PolarCrosshairDlg </short_name>
<text> Polar Trace </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RadiusCrosshairLabel </short_name>
<text> Radius </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> AngleCrosshairLabel </short_name>
<text> Angle </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RadiusCrosshairButton </short_name>
<text> Copy &Radius </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> AngleCrosshairButton </short_name>
<text> Copy &Angle </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MustBeExpr </short_name>
<text> Must be editing an expression. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RightMarginSetAt </short_name>
<text> Right Margin set %.1f inches from edge of the printed page. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RightMarginBeyond </short_name>
<text> Right margin set beyond the edge of the printed page. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RightMargin </short_name>
<text> Right margin not set. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NotMcd </short_name>
<text> Is not a Mathcad worksheet. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoSave </short_name>
<text> Problem saving file. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DlgErrorTrace </short_name>
<text> Error trace type must be specified for two consecutive traces. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DlgZeroMat </short_name>
<text> Zero or single element matrix not allowed. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DlgMatExceed </short_name>
<text> Exceeds maximum number of elements. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DlgMatDelete </short_name>
<text> Cannot delete that many rows or columns at current location. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DlgMatAdd </short_name>
<text> Cannot add that many elements. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DlgPageRange </short_name>
<text> Valid range of pages: %d to %d. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DlgNoRegion </short_name>
<text> No region selected. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> IntlWarn </short_name>
<text> Ignoring input -- must restore US or Canadian keyboard! </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Locked </short_name>
<text> This area is locked! </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Include </short_name>
<text> Makes definitions from another worksheet available. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Included </short_name>
<text> Reference: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MenuNumeric </short_name>
<text> Cursor must be on an answer. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MaxWindows </short_name>
<text> Cannot open another window. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> OLEFailedToLoadServer </short_name>
<text> The server application, source file, or item cannot be found.\n Make sure the application is properly installed, and that it has\n not been deleted, moved or renamed. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PrintNotSel </short_name>
<text> Printer has not been selected. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ESCToInterrupt </short_name>
<text> Press ESC to interrupt processing. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Interrupted </short_name>
<text> Processing interrupted. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DemoRightDoc </short_name>
<text> Demo version -- reached right of worksheet. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DemoBotDoc </short_name>
<text> Demo version -- reached bottom of worksheet. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> InterruptQuery </short_name>
<text> Interrupt processing </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Warning </short_name>
<text> Warning </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MUNIT </short_name>
<text> mass </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> LUNIT </short_name>
<text> length </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TUNIT </short_name>
<text> time </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> QUNIT </short_name>
<text> charge </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> XUNIT </short_name>
<text> temperature </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> LMUNIT </short_name>
<text> luminosity </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SUNIT </short_name>
<text> substance </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Auto </short_name>
<text> Auto </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> WAIT </short_name>
<text> WAIT </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CalcF9 </short_name>
<text> Calc F9 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Space </short_name>
<text> </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MEMORY </short_name>
<text> MEMORY </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PageNumber </short_name>
<text> Page </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Untitled </short_name>
<text> Untitled </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Variables </short_name>
<text> Variables </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Constants </short_name>
<text> Constants </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Text </short_name>
<text> Text </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> GreekVars </short_name>
<text> Greek Variables </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> User1 </short_name>
<text> User 1 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> User2 </short_name>
<text> User 2 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> User3 </short_name>
<text> User 3 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> User4 </short_name>
<text> User 4 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> User5 </short_name>
<text> User 5 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> User6 </short_name>
<text> User 6 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> User7 </short_name>
<text> User 7 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Symbols </short_name>
<text> Symbols </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SelectFont </short_name>
<text> Current Selection Font </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> UndefFont </short_name>
<text> Undefined Font </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Header </short_name>
<text> Header </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Footer </short_name>
<text> Footer </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RotMathFont </short_name>
<text> Rotated Math Font </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> GreekCompat </short_name>
<text> Greek Compatibility </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TextFormat </short_name>
<text> Text Format </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> DefTextFormat </short_name>
<text> Default Text Format </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NormalStyle </short_name>
<text> Normal </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoStyle </short_name>
<text> (none) </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDFont </short_name>
<text> Font: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDSize </short_name>
<text> Size: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDColor </short_name>
<text> Color: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDBold </short_name>
<text> Bold </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDItalic </short_name>
<text> Italic </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDUnderlined </short_name>
<text> Underlined </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDStrikeout </short_name>
<text> Strikeout </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDSubscripted </short_name>
<text> Subscripted </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDSuperscripted </short_name>
<text> Superscripted </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDNoScripted </short_name>
<text> Plain scripted </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDAttrOff </short_name>
<text> off </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDLeftIndent </short_name>
<text> Left Indent: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDRightIndent </short_name>
<text> Right Indent: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDFirstLine </short_name>
<text> First Line Indent: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDHangingIndent </short_name>
<text> Hanging Indent: </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDJustified </short_name>
<text> Justified </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDLeft </short_name>
<text> Left </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDCenter </short_name>
<text> Center </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SDRight </short_name>
<text> Right </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> None </short_name>
<text> none </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Xxs </short_name>
<text> x's </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Pluses </short_name>
<text> +'s </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Box </short_name>
<text> box </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Diamond </short_name>
<text> dmnd </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Circle </short_name>
<text> o's </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Solid </short_name>
<text> solid </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Dot </short_name>
<text> dot </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Dash </short_name>
<text> dash </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Dadot </short_name>
<text> dadot </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Red </short_name>
<text> red </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Blue </short_name>
<text> blu </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Green </short_name>
<text> grn </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Magenta </short_name>
<text> mag </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Cyan </short_name>
<text> cya </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Brown </short_name>
<text> brn </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Black </short_name>
<text> blk </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> White </short_name>
<text> wht </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Lines </short_name>
<text> lines </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Points </short_name>
<text> points </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Error </short_name>
<text> error </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Bar </short_name>
<text> bar </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Step </short_name>
<text> step </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Draw </short_name>
<text> draw </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Stem </short_name>
<text> stem </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SolidBar </short_name>
<text> solidbar </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace1 </short_name>
<text> trace 1 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace2 </short_name>
<text> trace 2 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace3 </short_name>
<text> trace 3 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace4 </short_name>
<text> trace 4 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace5 </short_name>
<text> trace 5 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace6 </short_name>
<text> trace 6 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace7 </short_name>
<text> trace 7 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace8 </short_name>
<text> trace 8 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace9 </short_name>
<text> trace 9 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace10 </short_name>
<text> trace 10 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace11 </short_name>
<text> trace 11 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace12 </short_name>
<text> trace 12 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace13 </short_name>
<text> trace 13 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace14 </short_name>
<text> trace 14 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace15 </short_name>
<text> trace 15 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Trace16 </short_name>
<text> trace 16 </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> LocalGraphTitle </short_name>
<text> Formatting Currently Selected X-Y Plot </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> GlobalGraphTitle </short_name>
<text> Setting Default Formats for X-Y Plots </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> LocalPolarTitle </short_name>
<text> Formatting Currently Selected Polar Plot </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> GlobalPolarTitle </short_name>
<text> Setting Default Formats for Polar Plots </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> OpenDocTitle </short_name>
<text> Open </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> SaveAnimationTitle </short_name>
<text> Save Animation </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> XYTitleDlgTitle </short_name>
<text> X-Y Plot Title </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PolarTitleDlgTitle </short_name>
<text> Polar Plot Title </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditDenom </short_name>
<text> in DENOMINATOR, type space-bar to exit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditNumer </short_name>
<text> in NUMERATOR, type space-bar to exit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditExpon </short_name>
<text> in EXPONENT, type space-bar to exit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditSubsc </short_name>
<text> in SUBSCRIPT, type space-bar to exit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditRad </short_name>
<text> in RADICAL, type space-bar to exit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditAbs </short_name>
<text> in ABSOLUTE VALUE, type space-bar to exit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditUnit </short_name>
<text> Place for units conversion. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditXYExpr </short_name>
<text> Place for expressions to plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditXYNextExpr </short_name>
<text> Press , (comma) to type another expression to plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditXYUBData </short_name>
<text> Upper bound of data\073 you may insert axis limit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditXYLBData </short_name>
<text> Lower bound of data\073 you may insert axis limit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditXYUBLimit </short_name>
<text> Upper bound of axis\073 delete to see the upper bound of data. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditXYLBLimit </short_name>
<text> Lower bound of axis\073 delete to see the lower bound of data. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarRadExpr </short_name>
<text> Radius expressions to plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarAngExpr </short_name>
<text> Angle expressions to plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarNextRadExpr </short_name>
<text> Press , (comma) to type another radius expression. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarNextAngExpr </short_name>
<text> Press , (comma) to type another angle expression. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarUBData </short_name>
<text> Upper bound of radial data\073 you may insert axis limit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarLBData </short_name>
<text> Lower bound of radial data\073 you may insert axis limit. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarUBLimit </short_name>
<text> Upper bound of radial axis\073 delete to see the upper bound of data. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPolarLBLimit </short_name>
<text> Lower bound of radial axis\073 delete to see the lower bound of data. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditSurfaceExpr </short_name>
<text> Matrix expression for Surface plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditContourExpr </short_name>
<text> Matrix expression for Contour plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Edit3DScatterExpr </short_name>
<text> Matrix expression for 3D Scatter plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditVectorExpr </short_name>
<text> Matrix expression for Vector field plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Edit3DBarExpr </short_name>
<text> Matrix expression for 3D Bar Chart. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Edit3DExpr </short_name>
<text> Matrix expression for 3D plot. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> EditPlotMarker </short_name>
<text> Plot marker </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Save </short_name>
<text> &Save\tCtrl+S </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CantPasteArray </short_name>
<text> Can't paste an array here. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PlotStretch </short_name>
<text> Stretch plot to see subdivisions. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NewVersion </short_name>
<text> This version of Mathcad can't read this worksheet. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TagsBlank </short_name>
<text> One or more tag names left blank. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ViewOrig </short_name>
<text> You must have edited section. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> BookViewOrig </short_name>
<text> Viewing original section will discard your edits.\nSave edits to this section ? </text>
<text> Mathcad has detected the existence of THREED.DLL. This function pack will not work with the current version of Mathcad. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatRichText </short_name>
<text> Rich Text Format </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatObjectLink </short_name>
<text> ObjectLink </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatOwnerLink </short_name>
<text> OwnerLink </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatNative </short_name>
<text> Native </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatText </short_name>
<text> Text </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatBitmap </short_name>
<text> Bitmap </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatDIBitmap </short_name>
<text> Device Independent Bitmap </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatPicture </short_name>
<text> Picture </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatMathcad </short_name>
<text> Mathcad </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ClbFormatMathcadRTF </short_name>
<text> Mathcad Rich Text </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RepButton </short_name>
<text> Replace </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> InsButton </short_name>
<text> Insert </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoEditsAllowedHere </short_name>
<text> No edits allowed here. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoCuttingOriginal </short_name>
<text> Author's regions are copied, not cut. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoDeleteOperator </short_name>
<text> Cannot delete this operator. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> UINotesFail </short_name>
<text> The Mathcad connection to Lotus Notes failed to initialize. Make sure that the NotesDirectory variable in the [notes] section of %INIFILE% is set correctly. NotesDirectory should point to your Lotus Notes directory. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> UINotesFailComp </short_name>
<text> The Mathcad connection to Lotus Notes failed to initialize. Some components of notes are missing from your Notes Directory. See the [notes] section in %INIFILE% for a list of required files. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> UIMailThunkError </short_name>
<text> Cannot Find MailThunkDll </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PleaseInsertThe </short_name>
<text> Please insert the </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CDIntoCDDrive </short_name>
<text> CD into the CD-ROM drive </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RefCtrCDOnly </short_name>
<text> The Resource Center may only be accessed from a CD-ROM drive </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> WarningTitle </short_name>
<text> Warning </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> RefCtrCannotOpen </short_name>
<text> Cannot open the Resource Center in </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> HKEYMisc </short_name>
<text> Misc </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> HKEYLastInstalledCD </short_name>
<text> LastInstalledCD </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> NoPermissionToOpen </short_name>
<text> Sorry, your version of Mathcad can't open this file </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TmsRmn </short_name>
<text> Tms Rmn </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Helv </short_name>
<text> Helv </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Symbol </short_name>
<text> Symbol </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Courier </short_name>
<text> Courier </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> System </short_name>
<text> System </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Script </short_name>
<text> Script </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Roman </short_name>
<text> Roman </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Modern </short_name>
<text> Modern </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TimesNewRoman </short_name>
<text> Times New Roman </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MathSoftText </short_name>
<text> MathSoftText </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Arial </short_name>
<text> Arial </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CourierNew </short_name>
<text> Courier New </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MSSansSerif </short_name>
<text> MS Sans Serif </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MSSerif </short_name>
<text> MS Serif </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Helvetica </short_name>
<text> Helvetica </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Times </short_name>
<text> Times </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> XYZoomTitle </short_name>
<text> X-Y Zoom </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> PolarZoomTitle </short_name>
<text> Polar Zoom </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> MaxVal </short_name>
<text> Max. Val. must be greater than Min. Val. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> OpenAVI </short_name>
<text> Open AVI </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> VFW </short_name>
<text> Video for Windows(*.avi)|*.avi|| </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Open </short_name>
<text> &Open... </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Copy </short_name>
<text> &Copy </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Command </short_name>
<text> Co&mmand... </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> ConvBitmaps </short_name>
<text> Converting bitmaps should only be done on a high color display. Do you still want to convert bitmaps? </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> XAxis </short_name>
<text> X-Axis </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> YAxis </short_name>
<text> Y-Axis </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Radial </short_name>
<text> Radial </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> Angular </short_name>
<text> Angular </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CvtSurface </short_name>
<text> Converting Old Surface Format To New 3-D Format </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CvtContour </short_name>
<text> Converting Old Contour Format To New 3-D Format </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TooSteep </short_name>
<text> The ratio of vertical to horizontal scales is too large. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TooShallow </short_name>
<text> The ratio of vertical to horizontal scales is too small. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> TooNarrow </short_name>
<text> The ratio of width to length of gridded region may be too extreme. </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCBlack </short_name>
<text> Black </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCMaroon </short_name>
<text> Maroon </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCGreen </short_name>
<text> Green </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCOlive </short_name>
<text> Olive </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCNavy </short_name>
<text> Navy </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCPurple </short_name>
<text> Purple </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCTeal </short_name>
<text> Teal </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCGray </short_name>
<text> Gray </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCSilver </short_name>
<text> Silver </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCRed </short_name>
<text> Red </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCLime </short_name>
<text> Lime </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCYellow </short_name>
<text> Yellow </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCBlue </short_name>
<text> Blue </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCFuschia </short_name>
<text> Fuschia </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCAqua </short_name>
<text> Aqua </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CCWhite </short_name>
<text> White </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CtxMenuProperties </short_name>
<text> P&roperties... </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CtxMenuEnable </short_name>
<text> &Enable Evaluation </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CtxMenuDisable </short_name>
<text> &Disable Evaluation </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CtxMenuOptimize </short_name>
<text> &Optimize </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CtxMenuShowPopup </short_name>
<text> &Show Popup </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> CmdAlignment </short_name>
<text> Alignment </text>
<tip> can't plot any points </tip>
<help_topic> </help_topic>
</message>
<message>
<short_name> StyleExists </short_name>
<text> This Style name already exists. Please specify another name. </text>